Home Screen; Steering Status Indicator - Raven SC1 Calibration & Operation Manual

Tractors and sprayers

Hide thumbs Also See for SC1:

Table of Contents

CHAPTER 4

HOME SCREEN

FIGURE 2. Home Screen Examples

Tractor

NOTE:

The Home screen will display settings and options based upon the machine type and the features

selected during the machine configuration calibration.

When operating in GPS Only mode, the Home screen is replaced with the GPS Status information. See

the GPS Status Screen section on page 33 for information displayed on this screen.

The following are common steering status or mode messages which may occur while the SC1/TC1 system is on the

ISOBUS:

Display

System critical DTCs are present. The SC1/TC1 system cannot be engaged in

this state. Refer to Chapter 8, Diagnostics and Troubleshooting, for assistance

with resolving active DTCs and troubleshooting the system.

Warning DTCs are present. The SC1/TC1 system may be engaged in this state,

but system performance may be impacted.

No active DTCs are present. The SC1/TC1 system is ready to be engaged.

Steering is engaged, with no active diagnostic or troubleshooting codes

present in the SC1/TC1 system.

Select the steering wheel icon to display the Steering Status screen. Refer to the Steering Status Screen section on

page 30 for additional assistance with the information available on this screen.

Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Tractors and Sprayers

All Other Machines

Message

Table of Contents

Tc1