Change Profile; Node Orientation - Raven SC1 Calibration & Operation Manual

Tractors and sprayers

Hide thumbs Also See for SC1:

Table of Contents

CHANGE PROFILE

FIGURE 4. Change Profile

To select a different profile, create a new profile, or recalibrate the current profile:

1. From the SC1/TC1 Home screen, select the Settings Menu button.

NOTE:

The name of the current profile selected is displayed at the top of the Machine Settings tab.

2. Select the Change Profile button.

NOTE:

Up to 5 machine profiles may be saved for the SC1/TC1 system.

3. Use the radio buttons to select a different profile.

Selecting an "Available" profile will require the operator to complete the Initial Machine Configuration process.

4. Select the Edit button to rename the selected profile or the Delete button to remove

profile settings from the SC1/TC1 system. The profile will need to be recalibrated.

5. Select the Accept button in the lower, right corner of the screen to return to the Machine

Settings tab.

FIGURE 5. Node Orientation

To adjust the node orientation:

Machine Settings and Tuning: Machine Settings Tab

MACHINE SETTINGS AND TUNING

Edit

Delete

Table of Contents

Tc1