Crx Features And Operation; Crx Widget Definitions - Raven SC1 Calibration & Operation Manual

CHAPTER 4
Select the GPS icon to display the GPS Status screen.
Display
Status
Current Accuracy
Number of Satellites
HDOP
Age of Differential
Vehicle Direction

CRX FEATURES AND OPERATION

CRX WIDGET DEFINITIONS

The following are common status or mode information which may be displayed on a ROS device while operating
the SC1/TC1 system while in a job:
Display
34 Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Tractors and Sprayers
Displays the selected GPS convergence status.
• Error
• No Signal
• Converging
• Converged
A value representing the reported horizontal accuracy of the
current GNSS solution as detected by the receiver.
The number of satellites currently in view by the GPS receiver.
Horizontal Dilution of Precision.
A higher value indicates that the satellites currently used for
the machine position are grouped closer together and
accuracy may be reduced. If the satellites are too close, the
system may record a High HDOP DTC.
Time (in seconds) since the last differential correction was
received. This field will not display a value if a differential
source is not currently tracked.
Select the Vehicle Direction button to manually override the
displayed direction of travel.
The SC1/TC1 node is detected, but the operator must accept
responsibility for the operation of the SC1/TC1 system.
No A-B path or guidance line has been set or an active DTC is
preventing the SC1/TC1 system from engaging.
Message
Message