Home Screen; Starting Guidance - Raven Cruizer II Operation Manual

Snow Depth Feature Overview
The Cruizer II™ snow depth feature is designed to help snowcat or trail
grooming equipment operators accurately gauge the current depth of snow
coverage against a reference map while performing grooming operations.
The Cruizer II also creates a map of covered runs or areas for review in the
office that may be used to help coordinate other snow management activities
throughout the season.
Note: Be sure to delete existing or previous jobs from internal memory before
updating the Cruizer software.

Home Screen

The version of firmware currently loaded
on the Cruizer II console is displayed in
the upper, right corner of the
Screen.
When the Snow Depth feature is enabled,
the Snow Depth Mode icon will be
displayed toward the upper, left corner of
the screen.
Note: Before starting any jobs requiring
snow depth features, be sure that the Snow Depth Mode icon is
displayed on the
The Snow Depth Authorization Code (P/N 077-0180-082) is required
for snow depth monitoring operations.

Starting Guidance

After completing the initial setup, the Cruizer II may be used to provide
guidance for field operations.
Note: Settings may need to be adjusted within the
proceeding with an actual guidance application.
DGPS reception must be sufficient before a job can be started. Verify
that the GPS Status Icon
displays that DPGS is O.K.
Start a New Job and Load Field Features
1. From the Home
2. To begin a new job with a clear coverage map, select the New Job option.
Note: Touch Cancel
beginning the job.
3. To load a previous reference map, select the "Enable Reference Job"
option.
Note: Do not select this option when creating a reference map.
Manual No. 016-0171-546 Rev. A
Home
Home Screen.
in the upper, left corner of the
Screen, touch Start Job
at any time to return to the
Tools Menu
before starting or resuming a job.
.
Home Screen
x.x.x
before
Home Screen
without
1