Motor Fusing - Aerotech DR300 Operation & Technical Manual

DR300 Operation and Technical Manual
2.4.

Motor Fusing

Most drive modules have their own power fuse. To replace a drive module fuse, follow
these steps:
To minimize the possibility of electrical shock and bodily injury, ensure that all
electrical power switches are in the off position and disconnect main power.
•
Turn off the DR300 power switch.
•
Loosen the two screws on the cover plate of the drive module securing it to the
front of the chassis, refer to Figure 2-13.
•
Remove the drive module from the DR300, refer to Figure 2-14.
•
Check for proper fuse size and type, and replace the fuse on the drive module.
(Refer to Sections 2.2.6 – 2.2.9 for drive modules)
Screws
Figure 2-13.
Version 1.5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Depending on the drive,
the fuse will mount in
one of two places.
Here or
See Sections 2.2.5.
Here
through 2.2.8. for
specific fuse locations.
Drive Module Fuse Mounting (Generic)
Aerotech, Inc.
Set Up
WARNING
2-29