Connector Pinouts; Ac Input Power Connector (J1); Vdc Power Connector (J2); Transformer Interface Connectors (J3, J5) - Aerotech DR300 Operation & Technical Manual

Soft-Start
4.4.
The Soft-Start / Voltage Selector Board contains five interface connectors, described in
the following sections.

4.4.1. AC Input Power Connector (J1)

The pinouts for the AC Input Power connector are listed in Table 4-2.
Table 4-2.

4.4.2. +24 VDC Power Connector (J2)

The pinouts for the +24 VDC connector are listed in Table 4-3.
Table 4-3.

4.4.3. Transformer Interface Connectors (J3, J5)

The pinouts for the Transformer Interface connectors are listed in Table 4-4.
Table 4-4.
NOTE: Transformer colors are referenced to custom Aerotech transformers only (P.N. EAX01010). Do not use with
other transformers.

4.4.4. Fan Interface Connector (J4)

The pinouts for the AC Input Power connector are listed in Table 4-5.
Table 4-5.
4-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DR300 Operation and Technical Manual

Connector Pinouts

AC Input Power Connector (J1) Pinouts
Pin Description
1 AC LO
2 AC LO
+24 VDC Power Connector (J2) Pinouts
Pin Description
1 COMMON
2 COMMON
Transformer Interface Connectors (J3, J5) Pinouts
Pin Description
Transformer Thermal Switch
1
(WHT WIRE)
Transformer 0VAC Lead
2
(BLU WIRE)
Transformer 0VAC Lead
3
(GRY WIRE)
Transformer Thermal Switch
4
(WHT WIRE)
Fan Interface Connector (J4) Pinouts
Pin Description
1 Fan AC HI (115VAC)
2 FAN AC LO
Aerotech, Inc.
Pin Description
3 AC HI
4 AC HI
Pin Description
3 +24 VDC
4 +24 VDC
Pin Description
Transformer 100VAC Lead
5
(GRN WIRE)
Transformer 115VAC Lead
6
(BRN WIRE)
Transformer 100VAC Lead
7
(ORN WIRE)
Transformer 115VAC Lead
8
(BLK WIRE)
Version 1.5