Enable Device Invoked Recording - Cisco 9971 Administration Manual

You can adjust the sidetone level. Available sidetone levels are:
• Normal
• Low
• Very Low
• Off (Default)
Procedure
Step 1 Go to Cisco Unified Communications Manager Administration and choose Device > Phone.
Step 2 Find your phone from the list of phones.
Step 3
Click on the Device Name of the phone.
Step 4 Go to Product Specific Configuration Layout area and from the Wideband Headset UI Control drop-down
list box, choose the applicable profile.
The Off option is selected by default (should be enabled only if the user headset supports wideband).
Parameters that you set in the Product Specific Configuration area may also appear in the Device Configuration
window for various devices and in the Enterprise Phone Configuration window.
If you set these same parameters in these other windows as well, the setting that takes precedence is determined
in the following order:
1 Device Configuration window settings
2 Common Phone Profile window settings
3 Enterprise Phone Configuration window settings
Step 5
Select Save.

Enable Device Invoked Recording

Configure the Device Invoked Recording feature from Cisco Unified Communications Manager Administration.
For more information and detailed instructions, see the "Monitoring and Recording" chapter in the Cisco
Unified Communications Manager Features and Services Guide.
Procedure
Step 1
Set the IP phone Built In Bridge to On.
Step 2 Set Recording Option to Selective Call Recording Enabled.
Step 3 Select the appropriate Recording Profile.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Enable Device Invoked Recording
227