8 x 2.5-inch front drive bays (AnyBay)
This section provides cable routing information for the server model with eight 2.5-inch front drive bays.
The server model is configured with one 8 x 2.5-inch Anybay front drive backplane. Below lists all supported
configurations with this front drive backplane.
Configuration
Config. 1
Config. 2
Config. 3
Configuration 1, 2, and 3:
Front: one 8 x 2.5-inch AnyBay backplane
Config.
Front BP
BP1:NVMe 0–1
BP1: NVMe 2–3
BP1: NVMe 4–5
1
BP1: NVMe 6–7
BP1: SAS
BP1:NVMe 0–1
BP1: NVMe 2–3
BP1: NVMe 4–5
2
BP1: NVMe 6–7
BP1: SAS
BP1:NVMe 0–1
BP1: NVMe 2–3
BP1: NVMe 4–5
3
BP1: NVMe 6–7
BP1: SAS
System board
SFF 8i RAID/HBA
PCIe 1, PCIe 2
PCIe 3
PCIe 7
PCIe 8
Gen 4: C 0
Gen3: C 0, C 1
PCIe 1, PCIe 2
PCIe 3
PCIe 7
PCIe 8
PCIe 1, PCIe 2
PCIe 3
PCIe 7
PCIe 8
PCIe 6
Storage controllers
Qty.
1
SFF 8i RAID/HBA
1
SFF 16i RAID/HBA
1
CFF 16i RAID/HBA
Storage controller
SFF 16i RAID/HBA
Gen 4: C 0
Gen3: C 0, C 1
Chapter 3
Type
CFF 16i RAID/HBA
C 0, C 1
MB
.
Internal cable routing
73