Step 3.
Pull and twist plunger pins and carefully lift the middle rear cage upward to release it from the
chassis.
Figure 100. Removing the middle 2.5-inch drive cage
Step 4.
Press the latch as shown and close the handle.
Figure 101. Closing the handle for the middle 2.5-inch drive cage
After you finish
If you are instructed to return the old drive cage, follow all packaging instructions and use any packaging
materials that are provided.
Install the middle 2.5-inch drive cage
Use this information to install the middle 2.5-inch drive cage.
ThinkSystem SR665 Maintenance Manual
244