4 x 3.5-inch front drive bays (AnyBay)
The server model is configured with one 4 x 3.5-inch AnyBay front drive backplane. Below lists all supported
configurations with this front drive backplane.
Configuration
option
Config. 1
Config. 2
Config. 3
Config. 4
Config. 5
Config. 6
Depending on your server configurations, refer to one of the following sections for cable routing information.
•
"Configuration 1 and 2: front drive bays only" on page 72
•
"Configuration 3 to 6: front drive bays and rear drive bays" on page 73
Rear BP
Qty.
Type
1
2 x 2.5" SAS/SATA
1
2 x 2.5" SAS/SATA
1
2 x 2.5" NVMe
1
2 x 2.5" NVMe
Storage controller
Qty.
Type
1
SFF 8i RAID/HBA
1
SFF 8i RAID/HBA
1
SFF 8i RAID/HBA
.
Chapter 3
Internal cable routing
71