Table of Contents
Advertisement
Procedure
Step 1.
Touch the static-protective package that contains the new backplane to any unpainted surface on
the outside of the server. Then, take the new backplane out of the package and place it on a static-
protective surface.
Step 2.
Install the two 7mm backplanes to the 7mm drive cage. See "Install the 7mm drive backplanes" on
page 205.
Step 3.
Connect the cables any cables from the 7mm drive backplanes. See "7mm drives" on page 64.
ThinkSystem SR665 Maintenance Manual
342
Advertisement
Table of Contents
