Table of Contents
Advertisement
After you finish
1. Install any components that you have removed from the failing system board.
• "Processor " on page 271 and "Heat sink" on page 273
• "Memory modules" on page 255
• "System fans" on page 384 and "System fan cage" on page 389
• "M.2 module" on page 239
• "RAID super capacitor modules" on page 293
• "Riser 1/2 assembly" on page 350 and "Riser 3 assembly" on page 359
• "CMOS battery" on page 162
• "OCP 3.0 Ethernet adapter" on page 262
2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information
for each component.
3. Install the air baffle if you have removed it. See "Install the air baffle" on page 152.
4. Install the top cover. See "Install the top cover" on page 394.
5. Push the power supplies into the bays until they click into place.
6. Connect power cords to the server and turn on the server.
7. Update the Universally Unique Identifier (UUID) and DMI/SMBIOS data with new vital product data
(VPD). Use the Lenovo XClarity Provisioning Manager Liteto update the UUID and DMI/SMBIOS data.
See "Update the Universal Unique Identifier (UUID)" on page 375 and "Update the DMI/SMBIOS data"
on page 376.
8. Enable TPM. See "Enable TPM" on page 376.
9. Optionally, enable Secure Boot.
ThinkSystem SR665 Maintenance Manual
374
Advertisement
Table of Contents
