Chapter 2. Server Components; Front View; Front View With Eight 2.5-Inch Front Drive Bays (Model 1); Front View With Eight 2.5-Inch Front Drive Bays (Model 2) - Lenovo ThinkSystem SR665 V3 System Configuration Manual

Chapter 2. Server components

This section contains information about each of the components associated with the server.

Front view

The front view of the server varies by model. Depending on the model, your server might look slightly
different from the illustrations in this topic.
Refer to the following front views for different server models:
• "Front view with eight 2.5-inch front drive bays (model 1)" on page 11
• "Front view with eight 2.5-inch front drive bays (model 2)" on page 11
• "Front view with sixteen 2.5-inch front drive bays (model 1)" on page 12
• "Front view with sixteen 2.5-inch front drive bays (model 2)" on page 12
• "Front view with twenty-four 2.5-inch front drive bays" on page 13
• "Front view with twelve 3.5-inch front drive bays" on page 13

Front view with eight 2.5-inch front drive bays (model 1)

Table 2. Components on the front of the server
Callout
"External diagnostics connector (optional)" on page 14
1
"Drive activity LED" on page 14
3
"Drive bay fillers" on page 14
5
"Rack latch (right)" on page 15
7
"Drive bays" on page 14
9

Front view with eight 2.5-inch front drive bays (model 2)

© Copyright Lenovo 2022
Callout
"VGA connector (optional)" on page 15
2
"Drive status LED" on page 14
4
"Front I/O module (on rack latch)" on page 15
6
"Pull-out information tab" on page 15
8
"Rack latch (left)" on page 15
10
11