Table of Contents
Advertisement
24 x 2.5-inch front drive bays (16SAS/SATA+8NVMe)
This section provides cable routing information for the server model with 24 x 2.5-inch front drive bays
(16SAS/SATA+8NVMe).
The server model is configured with two 8 x 2.5-inch SAS/SATA backplane (BP 1 and BP 2) and one 8 x 2.5-
inch AnyBay backplanes (BP 3). Below lists all supported configurations with these three front drive
backplanes.
Note: The AnyBay backplane (BP3) is used as a pure NVMe backplane.
Configuration
Config. 1
Config. 2
Config. 3
Config. 4
Storage controller
Qty.
2
1
1
1
Type
SFF 8i RAID/HBA
SFF 16i RAID/HBA
CFF 16i RAID/HBA
SFF 32i RAID
.
Chapter 3
Internal cable routing
99
Advertisement
Table of Contents
