Table of Contents
Advertisement
Pull-out information tab
The Lenovo XClarity Controller network access label is attached on the pull-out information tab. The default
Lenovo XClarity Controller hostname and the IPv6 Link Local Address (LLA) are provided on the tab.
Rack latches
If your server is installed in a rack, you can use the rack latches to help you slide the server out of the rack.
You also can use the rack latches and screws to secure the server in the rack so that the server cannot slide
out, especially in vibration-prone areas. For more information, refer to the Rack Installation Guide that comes
with your rail kit.
USB 3.1 Gen 1 connectors
The USB 3.1 Gen 1 connectors can be used to attach a USB-compatible device, such as a USB keyboard,
USB mouse, or USB storage device.
VGA connector
The VGA connectors on the front and rear of the server can be used to attach a high-performance monitor, a
direct-drive monitor, or other devices that use a VGA connector.
XClarity Controller USB connector
The XClarity Controller USB connector can be used to attach an Ethernet cable to manage the system using
XClarity Controller. The USB can also be used as a regular USB connector to the host OS.
ThinkSystem SR665 Maintenance Manual
22
Advertisement
Table of Contents
