Table of Contents
Advertisement
Step 3.
Install the top cover to your server.
Attention: Handle the top cover carefully. Dropping the top cover with the cover latch open might
damage the cover latch.
Figure 190. Top cover installation
1. Ensure that the cover latch is in the open position. Lower the top cover onto the chassis until
both sides of the top cover engage the guides on both sides of the chassis. Then, slide the top
cover to the front of the chassis.
Note: Before you slide the top cover forward, ensure that all the tabs on the top cover engage
the chassis correctly.
2. Rotate the cover latch until the top cover snaps into position. Ensure that the cover latch is
completely closed.
3. Use a screwdriver to turn the cover lock to the locked position.
After you finish
Complete the parts replacement. See "Complete the parts replacement" on page 397.
ThinkSystem SR665 Maintenance Manual
396
Advertisement
Table of Contents
