Table of Contents
Advertisement
Remove a B1/B2 rearwall bracket (middle)
Use this information to remove a B1 or B2 rearwall on the middle of the rear chassis.
About this task
Attention:
• Read "Installation Guidelines" on page 129 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Bz2XIeLEfGcrLGm9TSY_yt
• Youku:
http://list.youku.com/albumlist/show/id_52339612.html
ThinkSystem SR665 Maintenance Manual
312
Advertisement
Table of Contents
