Table of Contents
Advertisement
Procedure
Step 1.
Touch the static-protective package that contains the new RAID super capacitor module to any
unpainted surface on the outside of the server. Then, take the new RAID super capacitor module
out of the package and place it on a static-protective surface.
Step 2.
Install the super capacitor holder.
Figure 140. Super capacitor box installation
1. Align the notch on the super capacitor holder with the pin on the chassis as shown.
2. Pivot the super capacitor holder inward until the other side clicks into place.
ThinkSystem SR665 Maintenance Manual
304
Advertisement
Table of Contents
