8 x 2.5-inch front drive bays (NVMe)
This section provides cable routing information for the server model with eight 2.5-inch front drive bays.
The server model is configured with one 8 x 2.5-inch AnyBay front drive backplane (BP 1). Only onboard
configuration is supported.
Note: The AnyBay backplane (BP 1) is used as a pure NVMe backplane.
Configuration 1: (front drive bays only)
Config.
1
Front BP
BP1:NVMe 0–1
BP1: NVMe 2–3
BP1: NVMe 4–5
BP1: NVMe 6–7
System board
PCIe 1, PCIe 2
PCIe 3
PCIe 7
PCIe 8
.
Chapter 3
Internal cable routing
75