Table of Contents
Advertisement
Configuration 10 to 13: (front drive bays, mid drive bays, and rear drive bays)
Front: one 12 x 3.5-inch SAS/SATA backplanes
Mid: one 4 x 3.5-inch SAS/SATA backplane (BP 5)
Rear: one 4 x 3.5-inch SAS/SATA backplane/4 x 2.5-inch SAS/SATA backplane
Co-
Front BP
nfig.
SAS 0
SAS 1
10/
SAS 2
12
BP 4: SAS
BP 5: SAS
SAS 0, SAS
1
11/
13
SAS 2
BP 4: SAS
BP 5: SAS
The following illustration shows the cable routing for the configuration 10, the routing for the other
configurations is similar. Connections between connectors:
Note: For models that support Gen 3 and Gen4 adapters at the same slot, the illustration shows only the
cable routing information for Gen 4 adapters, the routing and connector information is similar for Gen 3
adapters.
Figure 46. Cable routing for configuration 10
ThinkSystem SR665 Maintenance Manual
122
System board
Mid/Rear BP
PCIe 4, PCIe 5
SFF 8i HBA
PCIe 1
PCIe 2
Gen 4: C 0
Gen3: C 0/C 1
↔
↔
,
1
1
2
2
Storage controller
SFF 32i RAID
C 0
C 1
C 2
↔
↔
,
, ...
3
3
n
n
Advertisement
Table of Contents
