Table of Contents
Advertisement
Step 3.
Install the middle drive cage onto chassis and drives into the drive bays. Then close the handle.
Figure 108. Installing the middle 3.5-inch drive cage and drives
1. Put the rear pins into the chassis slots.
2. Rotate the front of the drive cage down into place.
3. Install drives into the middle drive cage. See "" on page .
4. Press the latch as shown.
5. Rotate the handle to close it.
After you finish
1. Connect cables from the backplanes to a RAID/HBA adapter. See Chapter 3 "Internal cable routing" on
page 57.
2. Complete the parts replacement. See "Complete the parts replacement" on page 397.
ThinkSystem SR665 Maintenance Manual
250
Advertisement
Table of Contents
