Table of Contents
Advertisement
16 x 2.5-inch front drive bays (8SAS+8AnyBay)
This section provides cable routing information for the server model with 16 x 2.5-inch front drive bays (8SAS
+8AnyBay).
The following table lists the configurations for the server model with 16 x 2.5-inch front drive bays(8SAS
+8AnyBay).
Configuration
Config. 1
Config. 2
Config. 3
Config. 4
The following table shows the cable connections for all configurations:
Configuration 1, 2, 3, and 4: (front drive bays only)
Front: one 8 x 2.5-inch SAS/SATA backplane and one 8 x 2.5-inch AnyBay backplane
• SFF 8i RAID/HBA
• SFF 16i RAID/HBA
Config.
Front BP
BP 1: SAS
BP 2: SAS
1
BP 2: NVMe 0–1
BP 2: NVMe 2–3
BP 2: NVMe 4–5
BP 2: NVMe 6–7
BP 1: SAS
BP 2: SAS
2
BP 2: NVMe 0–1
BP 2: NVMe 2–3
BP 2: NVMe 4–5
BP 2: NVMe 6–7
Qty.
2
1
1
1
System board
SFF 8i RAID/HBA
Gen 4: C 0
Gen3: C 0, C 1
Gen 4: C 0
Gen3: C 0, C 1
PCIe 1, PCIe 2
PCIe 3
PCIe 7
PCIe 8
PCIe 1, PCIe 2
PCIe 3
PCIe 7
PCIe 8
Storage controller
SFF 8i RAID/HBA
SFF 16i RAID/HBA
CFF 16i RAID/HBA
SFF 32i RAID
Storage controller
SFF 16i RAID/HBA
Gen 4: C 0
Gen3: C 0, C 1
Gen 4: C 1
Gen3: C 2, C 3
.
Chapter 3
Internal cable routing
Type
81
Advertisement
Table of Contents
