Table of Contents
Advertisement
Install the 4 x 3.5-inch rear drive cage
Use this information to install the 4 x 3.5-inch rear drive cage.
About this task
The rear drive cage is supported on some server models at certain conditions. For detailed information, see
"Drive bay configurations and requirements" on page 139.
Attention:
• Read "Installation Guidelines" on page 129 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Bz2XIeLEfGcrLGm9TSY_yt
• Youku:
http://list.youku.com/albumlist/show/id_52339612.html
.
Chapter 4
Hardware replacement procedures
327
Advertisement
Table of Contents
