3.0 Setup
LCD
Display
Top line shows
current status
SETUP
Status...
01 Remote Setup
Press
Bottom line shows current
SETUP menu heading
Status...
01 Remote Setup
Figure 3-6, SETUP Button and Menus
SETUP: 01 Remote Setup
The following menus are used to set up the remote screen and clock.
•
01A Set Clock – The ME-ARC contains a real time clock that must be
set for proper operation of some features. These features are: the SETUP
button's 02C AC In-Time, 04B Gen Run Time, 04G Quiet Time, 4H Gen
Exercise menu items, and the 04 Fault History menu items under the
TECH button.
It is very important that you set the time clock as it is a critical piece in
effectively addressing fault issues, as well as for the proper start/stop
functions of your AGS device, if installed.
Info: The clock obtains power from the inverter and will reset if the
ME-ARC is disconnected from the inverter.
To set the current time:
From the Set Clock menu:
1.
Rotate the SELECT knob to the correct hour of day, and then press
SELECT.
2.
Rotate the SELECT knob to the correct minute setting, and then
press SELECT.
3.
Rotate the SELECT knob to the appropriate AM or PM setting, and
then press SELECT.
22
SETUP Button
Status...
Status...
02 Invert Setup
03 Charger Setup
**IMPORTANT**
© 2012 Magnum Energy, Inc.
Rotary SELECT Knob
Rotate to
desired
selection:
select SETUP
Status...
......
05 BMK Setup
Press to
menu