Mount The Smartrax Valve - Raven SmarTrax Installation Manual

Install a -6 ORFS (M) to -6 SAE O-ring (M) straight adapter fitting (P/N 333-0012-084) in Ports A2 and B2 of
1.
the flow switch (P/N 334-003-085).
Install the pressure transducers in Ports A1 and B1 of the flow switch.
2.
Note:
Depending on the model of the machine, the transducer may need to be installed in Port A3
instead of Port A1 to avoid interference.

Mount the SmarTrax Valve

Mounting Plate Installed
FIGURE 3.
Remove the bolts used to secure the machine's radar bracket (beneath the cab).
1.
SmarTrax Valve Installed on Mounting Plate
FIGURE 4.
Manual No. 016-4001-081
NOTICE
The appearance of the SmarTrax hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Hydraulic System Installation
11