Introduction; Ce Marking; System Design And Planning; Personnel - Honeywell NOTIFIER ID2000 Series Installation & Commissioning Manual

Hide thumbs Also See for NOTIFIER ID2000 Series:
Table of Contents

Advertisement

ID2000 Series Installation & Commissioning Manual
1

Introduction

The purpose of this manual is to provide the user with all
recommended procedure descriptions and full technical
details for the successful installation and commissioning
of NOTIFIER's ID2000 Series stand-alone fire alarm
controllers and repeaters or for a complete ID2000 Series
integrated Fire Control System.
Procedures described in this manual include appropriate
warnings and cautions to guide the user towards adopting
safe and methodical work practices during the installation
and commissioning phases.

1.1 CE Marking

CE
This panel is CE Marked to show that it conforms to the
requirements of the following European Community
Directives:
The EMC Directive 2004/108/EEC, by the application of
the following EMC Standards:
!
!
Low Voltage Directive 2006/95/EC, by the application of
the safety standard:.
!
The Constructive Products Directive 89/1-6/EC, by the
application of the following standards:
!
!

1.2 System Design and Planning

It is assumed that the system, of which the ID2000 Series
fire control equipment is a part, has been designed by a
competent fire alarm system designer in accordance with
the requirements of EN54 Part 14 and any other local
codes of practice that are applicable.
The design drawings should clearly show the positions of
all the ID2000 Series control equipment and field devices.

1.3 Personnel

Installation of this product must be carried out only by
suitably-qualified electrical engineers.
1
EN 61000-6-3: Electromagnetic Compatibility (EMC)
Generic emission standard for Residential,
Commercial and Light industrial environments
EN 50130-4: EMC Product family standard: Immunity
requirements for components of fire, intruder and
social alarm systems.
EN 60950-1: Safety of information technology
equipment.
EN 54-2: Fire detection and fire alarm systems -
Control and indicating equipment.
EN 54-4: Fire detection and fire alarm systems - Power
supply equipment.
997-433-000-5, Issue 5
May 2010

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Notifier id2002

Table of Contents