Introduction; Display And Controls; Touch Screen Display; Panel Buzzer - Honeywell NOTIFIER INSPIRE E10 Operating Instructions Manual

INTRODUCTION

The purpose of this manual is to explain how to use the
INSPIRE E10/E15 Fire Alarm Control panel's - Control
and Indicating Equipment CIE (hereafter also referred
to as the 'panel' or 'control panel'). It documents how
to use the built-in touch screen and push button
controls to access various functions and/or carry out
regular mandatory procedures required by the local
fire industry regulations. Helpful descriptions and tips
are also provided to assist the user in understanding
the status information provided by the Control Panel's
touch screen and light indicators. The INSPIRE
E10/E15 Control Panels are designed to meet the
requirements of EN 54-2 and EN 54-4.

DISPLAY AND CONTROLS

The control panel's touch screen display and LED
indications allow the user to review the system status
and with appropriate user PIN access perform tasks
in accordance with the requirements of the local fire
regulations.

TOUCH SCREEN DISPLAY

The panel's user interface is a large 10" colour touch
screen display (1280 × 800 pixels) for primary system
status, indication and control.
4

PANEL BUZZER

This internal panel buzzer provides an audible alert to
the authorised user to take immediate action whenever
the system detects any condition, such as a fire or fault
event.
Depending on the type of event, the buzzer activates a
continuous sound.
The SILENCE BUZZER control button is used to silence
(mute) the internal buzzer after it starts sounding
following a Fire/Fault event. This control is available at
all access levels without a need for PIN code.