Introduction - Honeywell Notifier INSPIRE E10 Installation Instructions Manual

Introduction

Introduction
The purpose of this manual is to provide the user with all recommended procedure descriptions and full technical
details for the successful installation and basic commissioning of INSPIRE Fire Alarm Control Panel based Fire
Control System.
EQUIPMENT DESIGN
An INSPIRE E10/E15 panel, the Control and Indicating Equipment (CIE) including its integral Power Supply
Equipment (PSE) design has been carried out in accordance with a quality management system, which
incorporates a set of rules for the design of all elements of the CIE and PSE. The components of the CIE and PSE
have been selected for the intended purpose, and are expected to operate within their specification when the
environmental conditions outside the cabinet of the CIE comply with class 3k5 of EN 60721-3-3.
SYSTEM DESIGN AND PLANNING
It is assumed that the system, of which the Notifier INSPIRE E10/E15 equipment (Control and Indicating
Equipment CIE) is a part, has been designed by a competent fire alarm system designer in accordance with the
requirements of local codes of practice that are applicable.
The design drawings (also referred to As Fitted Drawings) should clearly show the positions of all the Notifier
INSPIRE system equipment installation on site, these include panel, loop devices and external equipment that is
part of the system.
4