Download  Print this page

Pre-Installation Check List; Some Do's And Dont's - Honeywell NOTIFIER ID2000 Series Installation & Commissioning Manual

Hide thumbs


ID2000 Series Installation & Commissioning Manual

2.2 Pre-installation Check List

2.2.1 Some DO's and DON'T's
Before installing the ID2000 equipment or fitting sensors,
you must first ensure that the following criteria have been
met. Failure to do this may not only result in damage to
the equipment, but may also cause problems when
commissioning the equipment or adversely affect its
Before selecting a location for the control panel and
devices, DO make sure that:
a) The operating ambient temperature is in the
recommended range:
C to 35
C and
b) The relative humidity is between:
5% and 95%
c) The panel is wall mounted in a position which allows
clear visibility of displays and easy access to operating
controls. The height above floor level should be chosen
such that the LCD is just above normal eye level
(approximately 1.5 metres)
d) DO NOT locate the panel where it is exposed to high
levels of moisture
e) DO NOT locate the panel where there are high levels
of vibration or shock
997-433-000-5, Issue 5
May 2010



  Also See for Honeywell NOTIFIER ID2000 Series

This manual is also suitable for:

Notifier id2002