Pre-Installation Check List - Honeywell LT-32 Installation And User Manual

WHAT TO DO IF THE EQUIPMENT RECEIVED IS DAMAGED
If you have problems regarding the quality of any supplied order items including the FACP, its ancillaries or items are missing, follow the procedure below.
1. DO NOT continue with the installation but, contact your supplier for advice on what to do next. Similarly, if the product is found to be faulty during installation
contact your supplier immediately.
2. To aid your supplier and the manufacturer, you are requested to quote the manufacturer's unique batch reference number, which can be found on the packaging
or inside the back box.
3. Note all the details relevant to your complaint, date of receipt, packaging condition and forward it to your supplier.
4. Were the product needs to be returned to your supplier, you are requested to use the original packaging, or suitable anti-static equivalent, wherever possible.

2.1 Pre-installation check list

Before installing the LT-32 / LT-159 FACP you must first ensure that the following criteria have been met. Failure to do this, may not only result in damage to the
equipment but may also cause problems during commissioning operations, or adversely affect its performance:
•
DO ensure the operating ambient temperature where the panel is installed is in the range: -5°C ... +40°C.
•
DO Ensure the panel is installed where the relative humidity is between 5% ... 95% non-condensing.
•
DO Ensure the panel is installed in an area where solids and liquid entering is not beyond IP 30 rating.
•
DO NOT site the panel where there would be restricted access to the inside of the equipment and to the internal cabling and wiring connections points.
•
DO NOT locate the panel where there are high levels of vibration or shock.
TRANSIENT PROTECION
This equipment contains transient-protection devices. Although no system is completely immune from lightning transients and interference, to allow its correct
functionality and to reduce susceptibility, this equipment must be earthed correctly.
As with all static sensitive electronic components, this system may operate erratically or can be damaged if subjected to lightning-induced transients.
The use of overhead or outside aerial wiring is not recommended, due to the increased susceptibility to nearby lightning strikes.
M-168.1-SERIE-LT-EN / 08.2022
Fire Alarm Control Panel LT-32 / LT-159
9