Removing The Color Wheel Docking Board - Christie H Series Service Manual

3. Separate the sponge and DMD board.
4. Take out the DMD module then separate the DMD from DMD bracket.
5. Take out the DMD mask then loosen four screws with a M3 screwdriver to remove the thermal
module.

Removing the color wheel docking board

1. Remove two screws with a M3 screwdriver and unplug one connector securing the color wheel
docking board.
H Series Service Manual
020-000802-03 Rev. 1 (12-2016)
Parts and module replacement
69