Removing The Dynamic Aperture, Lamp Housing - Christie H Series Service Manual
Hide thumbs
Also See for H Series:
- User manual (15 pages) ,
- Quick start manual (2 pages) ,
- User manual (12 pages)
Table of Contents
Advertisement
Removing the dynamic aperture, lamp housing
1. Remove three screws with a M2.6 screwdriver and two connectors securing the dynamic
aperture module.
2. Then remove two screws with a M2.6 screwdriver securing the dynamic aperture.
3. Remove one screw with a M2.6 screwdriver securing the photo sensor board.
4. Remove four screws with a M2.6 screwdriver securing the lamp housing.
H Series Service Manual
020-000802-03 Rev. 1 (12-2016)
Parts and module replacement
67
Hide quick links:
Advertisement
Table of Contents
