Storage, Transport And Unpacking - ProMinent S1Ba 12017 PVT Operating Instructions Manual

3

Storage, transport and unpacking

Safety information
Scope of delivery
Storage
WARNING!
Only return the metering pump for repair in a cleaned
state and with a flushed liquid end - refer to the chapter
"Decommissioning"!
Only return metering pumps with a completed Decon‐
tamination Declaration form. The Decontamination Dec‐
laration constitutes an integral part of an inspection /
repair order. A unit can only be inspected or repaired
when a Declaration of Decontamination Form is sub‐
mitted that has been completed correctly and in full by
an authorised and qualified person on behalf of the
pump operator.
The "Decontamination Declaration Form" can be found
at www.prominent.com.
CAUTION!
Danger of material damage
The device can be damaged by incorrect or improper
storage or transportation!
– The unit should only be stored or transported in a
well packaged state - preferably in its original pack‐
aging.
– The packaged unit should also only be stored or
transported in accordance with the stipulated
storage conditions.
– The packaged unit should be protected from mois‐
ture and the ingress of chemicals.
Compare the delivery note with the scope of delivery.
Personnel:
n
1. Fit the caps to the valves.
3. Place the pump standing vertically on a pallet and secure against
falling over.
4. Cover the pump with a tarpaulin cover, allowing for rear ventilation.
Store the pump in a dry, sealed room under the ambient conditions
described in the Chapter "Technical Data".
Storage, transport and unpacking
Technical personnel
23