Baker AWA-IV Software Overview
Test Params Feature
The Data tab, Applications view contains a button labeled Test Params that opens a new window similar to the
example shown below when clicked.
This window provides you with a summary of parameters used for a specific test as it was executed by the operator
during testing. In many cases, it will simply reflect the parameters assigned to the Test ID; however, if an operator
makes changes to the parameters for any reason before executing the tests, the actual parameters used will be
reported in this window.
50
Baker AWA-IV 71-015 EN V16 User Guide
Fig 51: Test parameters window.
www.megger.com