Megger Baker AWA-IV User Manual page 172

Table 40: Test results parameters table; Meg-Ohm test parameters field descriptions.
Field name
Meg-Ohm_test_voltage
Meg-Ohm_min_Meg-Ohm Short integer
Meg-Ohm_test_time
Meg-Ohm_ramp_rate
Meg-Ohm_trip_level
Meg-Ohm_discharge_
multiplier
Meg-Ohm_PowerPack_
enabled
Table 41: Test results parameters table; polarization index test parameters field descriptions.
Field name
pi_test_voltage
pi_min_Meg-Ohm
pi_min_ratio
pi_ramp_rate
pi_trip_level
pi_da_only_enabled
pi_revert_to_da_enabled
pi_discharge_multiplier
pi_PowerPack_enabled
Table 42: Test results parameters table; HiPot test parameters field descriptions.
Field name
HiPot_test_voltage
HiPot_min_Meg-Ohm
HiPot_test_time
HiPot_ramp_rate
HiPot_trip_level
HiPot_discharge_multiplier Short integer
HiPot_PowerPack_enabled Yes/No
StepHiPot_PowerPack_
enabled
160 Baker AWA-IV 71-015 EN V16 User Guide
Type Description
Short integer Target voltage of test.
Minimum Meg-Ohm value.
Short integer Length of test.
Short integer Ramp rate.
Short integer HiPot trip value.
Short integer Number of minutes to discharge.
Yes/No 1=PP enabled; 0=No PP.
Type Description
Short integer Target voltage of test.
Short integer Minimum Meg-Ohm value.
Double Length of test.
Short integer Ramp rate.
Short integer HiPot trip value.
Yes/No 1=DA only; anything else PI.
Yes/No
Short integer Number of minutes to discharge.
Yes/No 1=PP enabled; 0=No PP.
Type Description
Short integer Target voltage of test.
Short integer Minimum Meg-Ohm value.
Short integer Length of test.
Short integer Ramp rate.
Short integer HiPot trip value.
Number of minutes to discharge.
1=PP enabled; 0=No PP.
Yes/No Not used.
www.megger.com