Step Voltage Test Id Table-(Testidprghipot); Reference Surge Waveform Table- (Refsrgwaveform) - Megger Baker AWA-IV User Manual

Step Voltage Test ID Table—(TestIdPrgHiPot)
Table 53: Step Voltage Test ID table fields descriptions.
Field name
test_key
test_voltage
min_Meg-Ohm
test_time
ramp_rate
prg_order
powerpack_enabled
Reference Surge Waveform Table— (RefSrgWaveForm)
This table contains the waveforms used as test criteria to pass or fail a motor base on a reference waveform.
Table 54: Reference surge waveform table fields descriptions.
Field name
refwave_test_key
WaveFormatVr
Xscale
Yscale
MicroSecPerPnt
VoltsPerPnt
peak_volts1
peak_volts2
peak_volts3
wave1Full
wave2Full
wave3Full
www.megger.com
Type Description
Long integer Test identification key.
Long integer Voltage for this step.
Short integer Minimum Meg-Ohm value for this step.
Short integer Length of time for this step.
Short integer Ramp rate for this step.
Long integer Step number.
Yes/No 1=PP enabled; 0=No PP
Type Description
Long integer Primary key field it is also stored in TestParameter and TestId
tables. Auto generated number.
Double Version of waveform record.
Integer Scale index for the x-axis (micro seconds per division).
Integer Scale index for the y-axis (volts per division).
Double Microseconds per point (Not used at this time).
Double Volts per point (Not used at this time).
Short integer Peak voltage reached for lead 1
Short integer Peak voltage reached for lead 2.
Short integer Peak voltage reached for lead 3.
Full wave form for lead 1.
Full wave form for lead 2.
Full wave form for lead 3.
165