Connecting Baker Awa-Iv To The Baker Ztx Accessory - Megger Baker AWA-IV User Manual

Using the Baker AT101 ZTX with Baker AWA-IV Analyzers

Connecting Baker AWA-IV to the Baker ZTX Accessory

1. Connect the AUX cable to the AUX/PP connector on the front panel of the Baker AWA-IV and the AUX
connector on the front panel of the Baker ZTX.
Item Description
1 AUX cable connected to ZTX and AWA front panel receptacles.
2 Test cables connect to rear of ZTX (see image below).
2. Connect Baker AWA-IV test lead 1 to the TEST LEAD 1 receptacle located on the back of the Baker ZTX.
3. Connect Baker AWA-IV test lead 2 and 3, and the ground lead to the GND/L2/L3 LEADS receptacle on the back
of the Baker ZTX.
120 Baker AWA-IV 71-015 EN V16 User Guide
Fig 129: Connect AUX cable between AWA and ZTX.
Fig 130: Connect AWA test leads to ZTX.
www.megger.com