Table of Contents
Advertisement
Data Tab—Application View
The Application view provides a place to enter data about a particular test. Information such as who did the test,
who the test was done for, which MCC the test was performed from, and a general memo can all be entered in
their respective fields when the test is conducted or at a later date. The general memo field is a good place to put
information such as humidity, noticeable vibration of the motor before it was tested, and so on.
NOTE: The tester type, tester serial number, and calibration date are stamped on this record to indicate what tester
performed the test.
You can use this view to add new application records (which add an empty test record), update existing information,
and delete test results.
To change the test result being displayed, click on the date/time in the top section of the Data tab. The Application
view will then display the selected date/time's information.
www.megger.com
Fig 50: Data tab, Applications view.
Baker AWA-IV Software Overview
49
Advertisement
Table of Contents
