Table of Contents
Advertisement
Baker AWA-IV Software Overview
Editing Motor IDs on an Existing Route
1. Use the Route ID combo box to select the route you want to edit.
2. The Motor IDs associated with that route will appear in the Route Motors list.
3. Motor IDs not included in the route will appear in the Available Motors list.
4. To add Motor IDs, select the Motor IDs that you want to add from the Available Motors list then click on the
<<Add button. Select one motor at a time, or use the control/shift keys to select a group of Motor IDs.
5. To remove unwanted Motor IDs from the route, select the Motor IDs from the Route Motors list then click
on the Remove>> button. The Motor IDs will be removed from the Route Motor list and returned to the
Available Motors list.
6. To change the order of the Motor IDs in the Route Motors list, select the motor or group of motors to move and
click on the Move Up or Move Down buttons found just below the list.
7. When you have finished editing a route, click on the Save List button to save your changes.
8. Click on Close to return to the Route tab in the Main window.
42
Baker AWA-IV 71-015 EN V16 User Guide
www.megger.com
Advertisement
Table of Contents
