Table of Contents
Advertisement
Baker AWA-IV Software Overview
Tabs
The left side of the Main window is used to navigate through the motors within the opened database. Three tabs
help you locate and select motors for testing.
The Explore tab displays the motor locations in a three-level view called the Motor Tree.
The Motor ID tab gives you an alphabetical list of Motor IDs. You can type the first few characters of the Motor ID
into the blank field above the list to locate a specific motor.
The Route tab provides predefined lists of motors used to locate a subject motor. The Route tab is similar to a route
often used in the predictive maintenance business.
Explore Tab
The Explore tab uses a tree structure to help you locate and select a particular Motor ID. The two upper levels of the
tree correspond to the location and building in which the physical motor is housed.
Location and Building are the default tree labels, but these labels can be changed to suit your situation and best
practices.
The lowest level is the Motor ID. In the example above, the selected Motor ID is BD#3. The motor is physically
located at the North Platte plant, Barrier Dam. By clicking on Motor ID, a motor and its associated data is loaded
from the database into the related tab fields on the right side of the window. It becomes the current motor. Expand
a motor location by clicking on the plus sign or contract a location by clicking on the minus sign.
38
Baker AWA-IV 71-015 EN V16 User Guide
Fig 40: Explore tab.
www.megger.com
Advertisement
Table of Contents
