Megger Baker AWA-IV User Manual page 30

Database Management and Maintenance
3. The software will open a Source window and will default to the folder in which the currently open database
resides. For example, in the graphic below the example database is open in the main program; so when the Data
Transfer button is clicked, the Source window defaults to the
the file name. Pick the default database or choose another database to transfer data from as needed.
4. After selecting the source database, click the Open button. The Data Transfer window appears with the source
database opened on the left side. This is the same Motor ID tree structure as used elsewhere in the software.
5. Click on the destination database Browse button to locate the destination database. A Destination File Open
dialog box appears and will default to the same folder used to open the source database.
6. Choose a destination database to open then click on the Open button. The Data Transfer window returns with
both databases open.
18 Baker AWA-IV 71-015 EN V16 User Guide
Fig 13: Select source Baker AWA-IV database
Fig 14: Data transfer source selection.
AWAData40
folder with the
Example.mdb
for
www.megger.com