Secure To Ground - STC Easy2Build Easy-Grow Assembly Instructions Manual

Secure to Ground

IMPORTANT: The greenhouse must be rmly secured to the ground.
!
Make sure the foundation is FLAT and LEVEL. Make sure the greenhouse
is square. The two diagonal measurements inside the greenhouse should
be identical.
From the inside of the greenhouse, insert the S34 anchor clips into
16
channels of side pro les L01C and L01D at each corner and center of both
sides. Place the S35 pegs through the holes and into the ground to establish proper
placement. Remove the pegs, dig holes 12"/30cm deep and ll with concrete. When
the concrete is partially dry, use a hammer to drive the pegs all the way into the
concrete and let dry completely for twenty four hours.
NOTE: Insert S34 anchor clips into the channel of side pro les L01C
and L01D at a slight angle and slide under the lip of the channel.
L01D
S34
VIEW FROM INSIDE.
www.stcny.com
L01C
S35
56 of 57
Anchor Clip
QTY
#S34 8
Anchor Peg
QTY
#S35 8