Install Side And Roof Panels - STC Easy2Build Easy-Grow Assembly Instructions Manual

Install Side and Roof Panels

Place all side and roof panels on a level surface.
Make sure the pieces are in the correct positions before assembling.
!
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
12.1
Remove protective plastic from both sides of panels Y9 and Y10.
Place side to face toward the sun facing out when
installing. Slide panels carefully into V-channels
in corner pro les L02A and L02B and side
pro les L03B, L03T and L03V.
As you continue sliding the
panels, make sure they t
into the V-channels in base
pro les L01C and L01D.
12.2 Remove protective plastic from both
sides of panels Y21, Y22 and Y23. Place
side to face toward the sun facing out
when installing. Slide panels carefully
into V-channels in gable pro les L03M,
L03N, L03Q, L03R, L03S and L03U and into
V-channels of front and back pro les
L02I, L02J, L02K and L02L. As you
continue sliding the panels make
sure they t into the V-channels
in center roof pro les
L02G and L02H.
!
Remove protective plastic from EACH side of poly carbonate
panels before installing. Dispose of plastic properly. Install with
side labeled "Face this side towards the sun" FACING OUT.
Panel
#Y9
www.stcny.com
Y10
Y9
Y22
Y21
Panel
QTY QTY
4 #Y10
51 of 57
Y9
Y10
Y10
Y10
Y10
Y9
Y21
Y22
Y23
Y21
6 #Y21 4
Y9
Y10
Y21
Y22
Y23
Y22
Panel
QTY
#Y22 4
#Y23 2