Secure To Ground - STC Easy2Build Easy-Grow 8' x 8' Assembly Instructions Manual

Secure to Ground

IMPORTANT: The greenhouse must be rmly secured to the ground.
!
Make sure the foundation is FLAT and LEVEL. Make sure the greenhouse
is square. The two diagonal measurements inside the greenhouse should
be identical.
From the inside of the greenhouse, insert the S34 anchor clips into channels
16
of side pro le L01C at each corner and center of both sides. Place the S35 pegs through
the holes and into the ground to establish proper placement. Remove the pegs, dig holes
12"/30cm deep and ll with concrete. When the concrete is partially dry, use a hammer to
drive the pegs all the way into the concrete and let dry completely for twenty four hours.
L01C
S34
VIEW FROM INSIDE.
www.stcny.com
NOTE: Insert S34 anchor clips into the channel of side pro les
L01C
L01C at a slight angle and slide under the lip of the channel.
S35
Anchor Clip
#S34
54 of 55
Anchor Peg
QTY
6 #S35
QTY
6