Table of Contents
Advertisement
1.10
Slide hex nut S14 and hex bolts S13 into U-cutout in both sides of
pro les L03C, L03D and L03K. Tighten securely to hold in place.
NOTE: ALL VIEWS ARE FROM INSIDE.
1.11A
Slide pro les L02I and L02J into connectors S09,
S10 and S12 until they click into place.
Connectors S09, S10 and S12 CLICK into place.
L02I
24.5"
(623 mm)
IMPORTANT: The holes are not at the midpoint of the pro les. Arrange
pro le so the 24.5" portion will be the bottom when standing.
!
There is only one way to properly fasten connectors into pro les. Line up parts
rst to ensure correct placement. Slide connectors until they CLICK securely into
pro le. Use WD40 or liquid soap if pieces do not easily slide together. Wear gloves.
Pro le
#L02I
#L02J
www.stcny.com
Connector
QTY
QTY
1
#S09
1
12 of 57
L02I
24.5"
(623 mm)
Connector
QTY
1
#S10
1
L02J
L02J
Connector
QTY
#S12
1
- Quick Links:
- List of Parts
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Easy2Build Easy-Grow and is the answer not in the manual?
Questions and answers
need plastic v-shaped strips to hold greenhouse plastic into corners. I have a 6x10 Poly Greenhouse. According to manual it is part # 35 the v - locker