Table of Contents
Advertisement
From the inside of the greenhouse, use two people to carefully lower center gable onto frame.
8.3
Line up and slide pro les L03N and L03Q into connectors S19 until they click securely into place.
Connectors S19 CLICK into place.
L03Q
S19
L03N
S19
From the inside of the greenhouse, use two people to carefully lower front and back gables onto
8.4
frame. Line up and slide connectors S20 into channels of pro les L03M, L03R, L03S and L03U.
L03R
S20
L03S
S20
www.stcny.com
L03N
!
There is only one way to properly fasten connectors into pro les. Line up parts
rst to ensure correct placement. Slide connectors until they CLICK securely into
pro le. Use WD40 or liquid soap if pieces do not easily slide together. Wear gloves.
IMPORTANT: U-shaped cutouts on
pro les L03R and L03S face the BACK.
L03R
L03M
L03M
L03S
S20
S20
S20
S20
41 of 57
L03Q
S19
L03N
S19
L03Q
IMPORTANT: U-shaped cutouts on
pro les L03N and L03Q face the FRONT.
L03U
L03U
S20
S20
L03S
L03R
- Quick Links:
- List of Parts
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Easy2Build Easy-Grow and is the answer not in the manual?
Questions and answers
need plastic v-shaped strips to hold greenhouse plastic into corners. I have a 6x10 Poly Greenhouse. According to manual it is part # 35 the v - locker