Table of Contents
Advertisement
7.2A
Lift front from inside and rest it next to sides. Line up connector S09 with pro le L07C, connector
S10 with pro le L07D and connectors S04 and S05 with pro les L01D.
S09
L07C
L14B
S04
L01D
Carefully pull the front until all connectors are half way inside each pro le. Make sure connector
7.2B
S37 attached to shelf pro les rest on top of pro le L04A. Push front into sides until connectors
click into place.
L04A
S37
S04
Connectors S04 and S05 CLICK into place.
!
There is only one way to properly fasten connectors into pro les. Line up parts
rst to ensure correct placement. Slide connectors until they CLICK securely into
pro le. Use WD40 or liquid soap if pieces do not easily slide together. Wear gloves.
www.stcny.com
S10
L07D
L14A
S05
S09
L07C
S09
L07C
S37
S04
L01D
Connectors S09 and S10 CLICK into place.
S10
L07D
S37
L14A
S05
L14B
L01D
38 of 57
- Quick Links:
- List of Parts
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Easy2Build Easy-Grow and is the answer not in the manual?
Questions and answers
need plastic v-shaped strips to hold greenhouse plastic into corners. I have a 6x10 Poly Greenhouse. According to manual it is part # 35 the v - locker