Otto Bock 50R300 Dyneva Instructions For Use Manual page 13

4.2 General Safety Instructions
CAUTION
Contact with heat, embers, or fire
Injuries (e.g. burns) caused by melting of the material
► Keep the product away from open flame, embers, and other sources of heat.
CAUTION
Excessive strain on load-bearing components
Injuries due to changes in or loss of functionality
Only use the product for the defined area of application.
►
► If the product has been exposed to extreme strain (e.g. due to falling), take any necessary
measures (e.g. repair, replacement, inspection by the manufacturer's customer service,
etc.).
CAUTION
Reuse on other patients and insufficient cleaning
Skin irritation, formation of eczema, or infections due to contamination with germs
Use the product only for a single patient.
►
► Clean the product regularly.
NOTICE
Contact with ointments, lotions, or other products that contain oils or acids
Insufficient stabilization due to loss of material functionality
Do not expose the product to ointments, lotions, or other products that contain oils or acids.
►
NOTICE
Exposure of the product to unsuitable environmental conditions
Damage, brittleness or destruction due to improper handling
► Avoid storage in condensing ambient humidity.
Avoid contact with abrasive substances (e.g. sand, dust).
►
► Do not expose the product to temperatures below -10 °C (14 °F) or above +50 °C (122 °F)
(e.g. sauna, excessive sunlight, drying on a radiator).
NOTICE
Contact with saltwater or water containing chlorine/soap, fresh water or abrasive sub­
stances (e.g. sand)
Damage and premature product wear
Following any contact with the substances identified above, promptly clean the product in
►
accordance with the section "Cleaning".
5 Handling
INFORMATION
► The daily duration of use and period of application are generally determined by the physi­
cian.
► The initial fitting and application of the product must be carried out by qualified personnel.
Ottobock | 13