Acx5096 Router; Figure 1: Acx5048 Port Panel; Figure 2: Acx5096 Port Panel - Juniper ACX5048 Manual

ACX5048 and ACX5096 Universal Access Router

ACX5096 Router

Related
Documentation
4
(QSFP+) ports. Each SFP+ port can operate as a native 10-Gigabit Ethernet port or as a
1-Gigabit Ethernet port when 1-gigabit optics are inserted. Each QSFP+ port (
) can operate as a 40-Gigabit Ethernet port or be channelized to operate as four
53
independent 10-Gigabit Ethernet ports (a total of 24 10-Gigabit Ethernet ports). The
6 QSFP+ ports can be used as either access ports or uplink ports. The ACX5048 provides
full duplex throughput of 1.44 Tbps. The ACX5048 has a 1 U form factor and is shipped
with redundant fans and redundant power supplies. The router can be ordered with
front-to-back airflow (air out or AFO) and with AC or DC power supplies.

Figure 1: ACX5048 Port Panel

ACX5048 can be used only as a standalone router.
As shown in Figure 2 on page
small form-factor pluggable (SFP+) top-of-rack router with 96 SFP+ ports and 8 quad
SFP+ (QSFP+) ports. Each SFP+ port can operate as a native 10-Gbps port or as a 1-Gbps
port. The QSFP+ ports
96
channelized to 4 independent 10 Gbps port speeds. The 8 QSFP+ ports can be used as
either access ports or as uplinks. The ACX5096 has a 2 U form factor and is shipped with
redundant fans and redundant power supplies. The router can be ordered with
front-to-back airflow (air out or AFO) and with AC or DC power supplies.

Figure 2: ACX5096 Port Panel

ACX5096 can be used only as a standalone router.
ACX5000 Router Models on page 5
ACX5000 System Software Overview on page 10
Protocols and Applications Supported by the ACX Routers on page 10
4, the ACX5096 is a is a 10-Gigabit Ethernet enhanced
and can operate at native 40 Gbps speed or can be
100
through
48
Copyright © 2015, Juniper Networks, Inc.