Klein 4000 Series Operation And Maintenance Manual page 87

Updating the TPU/SP-III TPU Software
TPU/SP-III TPU IP address in the
5. Enter the
is different than the default address, or click
default address is 192.168.0.81. The address will already be displayed if it was
queried or changed as described in "Querying or Changing the TPU/SP-III TPU
IP Address" on page B-2.
6. Click Update TPU Software .
An dialog box opens that enables file selection.
7. Select and open the update file to download and install.
The file is downloaded to the TPU/SP-III TPU and installed, and the
TPU/SP-III TPU software restarts. In about two minutes, a window opens
confirming the software update:
Enter TPU IP Address
if it is the default. The
Default Addr
B-5
text box if it